Products description
A. Summarize
DTSY950/DSSY950 Three-phase prepaid electronic meter uses large-scaled integrate circuit, SMT technics, world-famous branded long-life components and 5+2 digits LCD or 8 digits LED. It can measure the 50Hz~60Hz three-phase AC active consumption accurately. It meets all the technical requirement of the standard GB/T17215-2002 (idt IEC61036 international standard), GB/T18460.3-2001 and some other relative national standard. It can be mainly used in condition of prepayment firstly and consumption later to prepay energy and limit maximum load in order to solve the problem of power company in collecting payment. Good reliability, wide load, low consumption, high accuracy, good anti-disturbance performance.
B. Main function and characteristic
1. Can measure the positive and reverse active consumption and accumulate the reverse consumption to positive consumption.
2. Uses passive photo-electric insulation technique to output passive electronic impulse and LED to show power consumption.
3.Has the function of customer's purchasing energy in advance, limiting the maximum load, setting second warning energy and transfering the data by double-directed IC card.
4. LCD/LED shows the information of energy and meter circularly.
5. Has different card for each meter to avoid losing energy when card is lost.
6. Can re-read the information of balance energy, cumulate consumption and total purchasing times.
7. Can alarm when balance energy is lower than certain value and shut off power when the balance energy reaches zero, can also alarm in condition of over-load.
8. Can uses one vending system for single-phase and three phase prepaid meter.
9. Can protect the interface from attacking and store the data for more than 10 years.
10. Features good reliability, anti-tampering, wide load, low consumption, high accuracy, good anti-disturbance performance and working for long time without calibration.
C. Technical parameter
|
Class |
1 or 2 |
|
Voltage circuit consumption |
≤1W & 6VA |
|
Reference voltage |
3×100V, 3×380V (3P3W) 3×57.7/100V, 3×220/380V (3P4W) |
|
Basic current (rated max, current) |
3×1.5(6)A,3×20(80)A,3×30(100A (outside meter control) 3×5(20)A, 3×10(40)A, 3×15(60)A (inside meter control) |
|
Limited working temperature |
-30℃～+65℃ |
|
Relative humidity |
≤85% |
|
Standard |
GB/T 17215-2002《Class 1 and Class 2 static AC active meter》idt IEC61036 GB/T18460.3-2001《IC card vending system Part 3:Prepaid meter》 |
|
Other technical parameter |
Impulse width 80ms±20ms |
|
